MechaProgA (full bundle)

MechaProg A

We introduce interface and application created by Mechasoft, used for advanced diagnostics, repairs and programming of automatic transmisssion with integrated "Mechatronic" control units. 

We have developed our „MechaProg A“ tool for bench programming of V.A.G Mechatronics. It is a multiplexer, in connection with regular J2534 is powerfull programming and test station. Is not required to use any third party software. 

It can be installed on every modern PC/Tablet/Laptop with Microsoft Windows7, Windows8, Windows10. Works fully offline. Do not need any subscriptions. Works without time limits.

MechaProg can be delivered as READ-WRITE (clone copy - tool) or additionally can be equipped with databases.

Complete set (without database):

MechaProgA main Device, 
USB Cable,
Power adapter
J2534 Device

Cables set:
MECH-VL381
MECH-VL30002E
MECH-VL300AM
MECH-DQ400
MECH-DQ500
MECH-DL382
MECH-DL501
MECH-MBCVT7228
MECH-MB9G
MECH-MB7GDCT
MECH-MB7G
MECH-DCT45x

Activated modules for read/write/clone units:
DQ200, DQ250, DQ380, DQ381, DQ400, DQ500 (BOSCH), DL501, VL381
VGS-FDCT(724.0), VGS2-FDCT(724.0), VGS2-FCVT(722.8), VGSNAG3(725.0)
MPS6/W6DGA
BMW GS7Dxx

Activated modules for OBD Programming:
All 01J with KWP2000 and newer, ALL DQ200, ALL DQ250, VL381, DQ381, DL501, DL382, VGS-FDCT(724.0), VGS2-FDCT(724.0), VGS2-FCVT(722.8), VGSNAG3(725.0), VGSNAG2(722.9) [VGS1, VGS2, VGS3]

Activated MISC:
Coding VAG, Manual solenoid calibration for 722.8/722.9, Manual adaptation for 722.9, Manual advanced coding for 722.9, Simply coding for 722.8, Virgin for 722.9 VGS2NAG2 only